Manual bevelling machine NKO B15 INOX
SKU 26250
0 reviews
To order
Shipping
- Pickup (Self-pickup) (For free)
- New POST According to the carrier's rates.
- Meest According to the carrier's rates.
Payment
- Payment upon receipt
- Cash payment
- Payment by bank details
The NKO B15 INOX manual milling machine is a device for chamfering and rounding edges on stainless steel workpieces. The model can be used independently or together with the Xpipe system for processing sheets, profiles and pipes.
The NKO B15 INOX is equipped with a 2850 W motor with a speed of 1950 rpm. The reduced speed is adapted to milling stainless steel and helps reduce vibrations during operation. Depending on the installed milling head, chamfer angles of 30°, 40°, 45°, 52.5° and 60° are available, as well as rounding radii of R2.5, R3.5 and R4 mm.
The NKO B15 INOX manual milling machine is suitable for:
• Preparing stainless steel edges before welding.
• Chamfering sheets and profiles.
• Processing external and internal pipe edges.
• Rounding the edges of metal parts.
• Working with straight and curved sections.
• Use in metalworking and welding shops.
Technical specifications:
Power — 2850 W
Standard power supply — 230 V / 50 Hz
Available version — 120 V / 60 Hz
Speed — 1950 rpm
Feed — manual
Weight without Xpipe — 10.5 kg
Weight of the set with Xpipe — 18.75 kg
Processing parameters with Xpipe:
Maximum chamfer width on sheets and profiles — 15 mm
Chamfer angles — 30° / 40° / 45° / 52.5° / 60°
Rounding radii — R2.5 / R3.5 / R4 mm
Thickness of sheets and profiles — 3–20 mm
Maximum chamfer width on pipes — 15 mm
Pipe wall thickness for external chamfer — 2.5–15 mm
Pipe wall thickness for internal chamfer — 5–15 mm
Minimum pipe diameter for external chamfer — 85 mm
Minimum pipe diameter for internal chamfer — 500 mm
Processing parameters without Xpipe:
Maximum chamfer width — 10 mm
Chamfer angles — 30° / 40° / 45° / 52.5° / 60°
Rounding radii — R2.5 / R3.5 / R4 mm
Thickness of sheets and profiles — unlimited
Wall thickness of pipes — unlimited
Minimum pipe diameter for external chamfer — unlimited
Minimum pipe diameter for internal chamfer — depends on the installed cutting head
Advantages and features:
1. The Xpipe system expands the capabilities of the equipment for processing sheets, profiles and pipes and allows you to form a chamfer with a width of up to 15 mm.
2. The 1950 rpm speed is adapted to work with stainless steel and helps reduce vibrations and stress on the cutting tool.
3. The LED load indicator allows the operator to monitor the operating mode and respond to overloads in a timely manner.
4. A separate indicator reports the need to replace the motor carbon brushes.
5. Interchangeable milling heads allow you to select the chamfer geometry or radius of curvature in accordance with the technological task.
6. The weight of 10.5 kg without the Xpipe system allows you to move the equipment between workplaces and bring it directly to the workpiece.
What does the use of the Xpipe system provide?
Xpipe changes the way the tool is positioned relative to the workpiece and expands the available processing range. In particular, the maximum chamfer width increases from 10 to 15 mm, and for pipes, specific ranges of wall thickness and minimum diameter are set depending on external or internal processing.
You can buy the NKO B15 INOX manual milling machine from KVERB separately or in a set with the Xpipe system. We will help you determine the necessary configuration and select milling heads according to the type of workpiece and chamfer parameters. Check the current price, equipment and delivery times with the managers.
Specifications Manual bevelling machine NKO B15 INOX
- Weight 19 kg
- Number of revolutions 1950 m/min
- Motor power 2.85 kW
Reviews