Plasma cutter for metal Helvi PC EVO 50.3
SKU 99835040
0 reviews
To order
Shipping
- Pickup (Self-pickup) (For free)
- New POST According to the carrier's rates.
- Meest According to the carrier's rates.
Payment
- Payment upon receipt
- Cash payment
- Payment by bank details
Plasma cutter for metal Helvi PC EVO 50.3 is a professional inverter device for air-plasma cutting of steel, stainless steel, aluminum and other metals. Compact design, three-phase power supply and current regulation allow the model to be used in production, installation and repair work.
Helvi PC EVO 50.3 operates in the current range of 20–45 A. The device provides a clean cut of material up to 15 mm thick at a speed of 25 cm/min, maximum cutting up to 20 mm and severing cutting up to 22 mm. The model also supports piercing of material up to 12 mm thick.
Specifications:
Input voltage, 3 phases: 400 V ±10%, 50/60 Hz
Power at 60% duty cycle: 7 kVA
Maximum input current: 14 A
No-load voltage: 240 V
Current range: 20–45 A
Duty cycle at 40°C: 45 A at 50%; 35 A at 100%
Clean cut: up to 15 mm at 25 cm/min
Maximum cutting thickness: 20 mm
Separation cutting: up to 22 mm
Punching: up to 12 mm
Air consumption: 220 l/min at 5 bar
Insulation class: H
Protection degree: IP22S
Dimensions: 195×495×395 mm
Net weight: 19.1 kg
Packaged weight: 20.1 kg
Complete set:
• Plasma torch EP 105, 6 m long.
• Grounding cable, 4 m long.
• Starter kit for working with a 20–70 A cutter.
The plasma metal cutter is suitable for:
• Metalworking workshops.
• Installation and repair work.
• Manufacturing of metal structures.
• Manufacturing of gates, doors and fences.
• Working with steel, stainless steel and aluminum.
• Training workshops and production areas.
Advantages and features:
1. Inverter technology ensures compactness of the device and stable regulation of the operating current.
2. The plasma cutter for metal has a range of 20–45 A, which allows you to select the mode according to the thickness of the material.
3. The duty cycle of 35 A at 100% is suitable for long-term work without frequent technological breaks.
4. A clean cut of up to 15 mm allows you to perform most typical production and repair operations.
5. Dividing cutting of up to 22 mm expands the possibilities of working with thicker workpieces.
6. Punching up to 12 mm allows you to start cutting inside the sheet without necessarily moving away from the edge.
7. Air flow rate of 220 l/min at 5 bar allows you to pre-select the compressor of the required performance.
8. Weight of 19.1 kg and compact dimensions make it easy to move the device between work areas.
KVERB provides delivery across Ukraine, official warranty, service and technical support. Contact our managers to get an up-to-date offer for Helvi PC EVO 50.3.
Specifications Plasma cutter for metal Helvi PC EVO 50.3
- Weight 19 kg
- Height 395 mm
- Length 195 mm
- Max power 7 kVA
- Operating current 20 - 45 A
- Width 495 mm
Reviews