Beveling machine for metal NKO UZ29 SPEEDER
SKU 1962
0 reviews
To order
Shipping
- Pickup (Self-pickup) (For free)
- New POST According to the carrier's rates.
- Meest According to the carrier's rates.
Payment
- Payment upon receipt
- Cash payment
- Payment by bank details
NKO UZ29 SPEEDER metal edger is an automatic feeding device for preparing the edges of metal workpieces before welding. The model forms a chamfer up to 29 mm wide and can be used for processing structural and stainless steel, copper, brass and aluminum.
NKO UZ29 SPEEDER supports double-sided processing for forming X- and K-shaped edge preparation without turning the workpiece over. Depending on the installed KIT, chamfer angles of 22.5°, 30°, 37.5°, 45° and 50° are available. The design provides for stationary and mobile operating modes, as well as the possibility of use with a 3D manipulator.
NKO UZ29 SPEEDER metal edger is suitable for:
• Preparing the edges of metal workpieces before welding.
• Forming single-sided and double-sided chamfers.
• Processing structural and stainless steel.
• Copper, brass and aluminum work.
• Metal construction manufacturing.
• Machine building, shipbuilding and welding industries.
Technical specifications:
Maximum chamfer width for material with strength up to 400 MPa — 29 mm
Maximum chamfer width for material with strength over 400 MPa — 25 mm
Chamfer angles — 22.5° / 30° / 37.5° / 45° / 50°
Chamfer angle adjustment — interchangeable KIT sets
Material thickness — 6–60 mm
Motor power — 1500 W
Feed speed — 1.8 m/min
Weight — 205 kg
Advantages and features:
1. Automatic feed provides independent movement of the equipment along the edge at a speed of up to 1.8 m/min.
2. Double-sided processing allows you to form X- and K-shaped edge preparation without turning heavy metal workpieces.
3. Interchangeable KIT sets allow you to choose the required chamfer angle according to the type of welded joint.
4. The 3D manipulator simplifies equipment positioning and compensates for unevenness of the working surface and deviations in the position of the workpiece.
5. The design allows you to use the equipment in stationary or mobile mode, depending on the organization of the production site.
6. Small workpieces can be installed directly in the equipment for processing their edges.
The NKO UZ29 SPEEDER metal edger is presented in the KVERB assortment. We will help you determine the required angle and width of the chamfer, select the complete set and additional equipment according to the material and welding technology. To clarify the cost, delivery times and complete set, contact the managers.
Specifications Beveling machine for metal NKO UZ29 SPEEDER
- Weight 205 kg
- Height 745 mm
- Length 1 010 mm
- Motor power 1.5 kW
- Material thickness 6 – 60 mm
- Feed rate 1.8 m/min
- Width 1 326 mm
Reviews