Welcome to the updated KVERB website! If you have any questions or issues while using the site, please contact us at +380 98 127 45 85.


Your cart is empty

Add products you like to the cart

30 October 2026
137

Ventilation manufacturing: equipment for round and rectangular ducts, lines and the full Sente Makina cycle

Ventilation manufacturing involves two different technology paths: round ducts and rectangular (square) ducts. Each has its own set of machines, its own bottlenecks and its own scaling logic. Most customers want one contractor for the whole system, so a workshop that handles both formats wins more orders. Below is how we at KVERB select equipment for each path, when to move to lines, and what the full cycle from coil to finished product includes, including Sente Makina solutions. We go from large plants and Sente Makina automatic lines down to the electric and manual equipment you can start with.

The full ventilation manufacturing cycle: from coil to installation

  1. Feeding and cutting. Coil uncoilers, guillotines, circle cutters and plasma cutting for ventilation.

  2. Forming the duct body. For round ducts: rolls or spiral duct machines; for rectangular: bending presses and edge folders.

  3. Stiffness and seams. Beading machines, stiffening rib machines, seamers.

  4. Fittings. Elbows and fittings machines, gore elbow machines.

  5. Joining. Flange machines for round ducts, TDF flange lines and corner inserting machines for rectangular ones.

  6. Assembly. Tunnel assembly, spot welding, geometry control.

Large plants: Sente Makina lines and the full cycle

KVERB supplies Sente Makina equipment for ventilation production, from edge folders and flange machines to automatic lines for round and rectangular ducts. Below is how the solutions are distributed across stages. Please confirm the exact configuration and model specifications with a manager.

  • Spiral duct lines (Tubeformer Auto, HeavyDuty Tubeformer): automatic production of spiral pipes from coil.

  • ELBOW MAKER and CORNER MATIC: automated production of elbows and bends for round systems, removing the bottleneck on fittings.

  • Sente Makina FM edge folders (Snaplock and Pittsburgh): seam forming for rectangular ducts.

  • MINI LINE and MINI LINE HYDRO: a modular rectangular duct line that automates the longest operations: cutting, bending and seam forming.

  • AUTO DUCT FORMER: automatic production of rectangular ducts from sheet to a finished product with a flange for industrial sites.

  • Flange machines and TDF flange equipment: preparation of TDF flanges required by large construction and industrial projects.

Seam closing machine Sente Makina SeamCloser SC2

Seam closing machine Sente Makina SeamCloser SC2

Slide-on-flange forming machine Sente Makina T-30

Slide-on-flange forming machine Sente Makina T-30

Sente Makina gasket installation machine

Sente Makina gasket installation machine

Spiral duct forming machine Sente Makina Post Tensioning Duct Machine

Spiral duct forming machine Sente Makina Post…

When to move to lines

A line is justified when manual and standalone machines become a bottleneck: operators are short, site volumes grow, customers demand stable geometry and TDF flanges. A line replaces several machines, takes less space in the workshop and lets fewer people run the process. The typical path is manual equipment, then electric, then semi-automatic and an automatic line, depending on the order portfolio.

For large plants and projects with constant load we advise moving to lines rather than adding more individual machines. One line replaces several machines and needs fewer operators. It takes less floor space than a set of separate machines and lets you reduce and reuse material waste. For rectangular ducts these are Sente Makina lines, tunnel assembly and a rail-profile line, for round ducts Sente Makina spiral-wound machines with automated control. More automation means fewer manual operations and a faster ramp-up to the volumes you need.

Decoiler SENTE UNC 1500/7-M

Decoiler SENTE UNC 1500/7-M

Decoiler SENTE UNC 1500/7

Decoiler SENTE UNC 1500/7

Lock seam closing machine Sente Makina VSC

Lock seam closing machine Sente Makina VSC

Seam closer machine Mazanek ZRR 2000

Seam closer machine Mazanek ZRR 2000

Equipment for rectangular and square ducts

A rectangular duct is four precise bends, an even seam and a flange connection. Each operation has its own equipment class, and the requirements of large projects, in particular the TDF flange, determine whether a workshop can take such orders.

  • Scale: rectangular duct lines that combine cutting, bending and seam forming.

  • Growth: seam forming on the edge folder, a corner inserting machine, a stiffening rib machine, TDF flange equipment, tunnel assembly.

  • Start: a bending press, a guillotine, an edge folder for the seam, a beading machine and a seamer. A basic set for smaller sites.

All equipment for rectangular ducts is in the Rectangular duct equipment category.

Sheet metal folding machine Say-Mak SCM-F 2500

Sheet metal folding machine Say-Mak SCM-F 2500

Hydraulic sheet metal bending machine Mazanek ZGH 6000

Hydraulic sheet metal bending machine Mazanek ZGH 6000

Guillotines for metal ZAKMET NGR 3000/0.8

Guillotines for metal ZAKMET NGR 3000/0.8

Contact spot welding machine HTP104

Contact spot welding machine HTP104

Equipment for round ducts: how to choose

Round ducts are pipes, elbows, tees and transitions. Workshop productivity is defined by three operations: forming the pipe, the seam and the fittings. A poor seam means a leaking duct, so this is not the place to save.

  • Scale: spiral duct machines for continuous pipe production from coil and flange machines.

  • Growth: gore elbow and elbow machines, spot welding, a coil uncoiler for stable feeding. Manual work on elbows and transitions is reduced.

  • Start: a guillotine or circle cutter, rolls, a beading machine and a seamer. This set covers pipes and simple fittings in small volumes.

All equipment for this path is collected in the Round duct equipment category.

Guillotines for metal SAY-MAK SRGM-HCL 2060/3.0

Guillotines for metal SAY-MAK SRGM-HCL 2060/3.0

Plate rolling machine Isitan 4R HMS 3100x250

Plate rolling machine Isitan 4R HMS 3100x250

Beading Say-Mak SK 0.8

Beading Say-Mak SK 0.8

Plate rolling machine RAS RME 70/153

Plate rolling machine RAS RME 70/153

New or used equipment

Used machines from Europe are also considered for starting a ventilation workshop. This makes sense if the equipment has been inspected and You understand its condition and configuration. Read more in Machines from Europe turnkey and see current stock in the used equipment section.

Typical mistakes when launching a ventilation workshop

  • Buying separate machines without calculating the whole chain: a powerful machine with weak cutting gives no productivity.

  • Saving on the seam of a round duct: a poor seam means leaks.

  • No equipment for the TDF flange, so the workshop cannot take large sites.

  • Workshop dimensions, power supply and space for coils and finished products not accounted for.

Frequently asked questions about ventilation manufacturing

What equipment is needed to produce round ducts?

The basic set is a guillotine or circle cutter, rolls, a beading machine and a seamer. For continuous pipe output add a spiral duct machine, and for elbows and bends, specialised machines.

How does equipment for rectangular ducts differ?

Rectangular ducts are made by bending sheet and forming seams, and the TDF flange is often used for joining. So you need bending presses, edge folders and TDF flange equipment, and lines for large volumes.

When is an automatic duct line justified?

When volumes and site requirements exceed what standalone machines can do: operators are short, and stable geometry and speed are needed. Before buying a line we analyse Your order portfolio.

Does KVERB help assemble the full cycle?

Yes. We select equipment for Your ducts, arrange delivery across Ukraine, documentation and warranty, and support commissioning. For a general overview of machine types see Equipment for ventilation production: types of machines.

Ventilation manufacturing equipment in the KVERB catalogue

Equipment for rectangular ducts · Equipment for round ducts · Press brakes · Beading machines · Seaming machines · Coil uncoilers · Plasma cutting for ventilation · Guillotine shears

We will put together a set for Your workshop

Tell us which ducts You produce or plan to produce, from what material and in what volumes. We will propose a set and a purchasing order. Phones: +38 (098) 127 45 85, +38 (050) 673 51 21. Email: info@kverb.eu.

Get the best deals and promotions first

By clicking the "Subscribe" button, I consent to the processing of my personal data in accordance with the Law of Ukraine "On Personal Data Protection" dated 01.06.2010 No. 2297-VI on the terms and for the purposes specified in the Privacy Policy.
brand
brand
brand
brand
brand
brand
brand
brand
brand
brand