In-house production of roofing and facade elements: what equipment a roofing company needs
A roofing company that buys ready-made elements such as flashings, trims, ridge caps and gutters depends on other suppliers' lead times and margins. In-house production of roofing and facade elements lets you make parts exactly to the size of the site, fulfil orders faster and keep costs under control. Below is the equipment needed for this and where to start.
Which elements you can make yourself
Flashings, trims, abutments, parapet caps, ridge caps.
Standing seam roofing elements and clips.
Gutters, downpipes and drainage system elements.
Facade profiles and cassettes, described in the article Facade cassette production on bending equipment.
Ventilation and chimney elements from sheet metal.
Basic set: where to start
Most roofing elements are made from sheet in two operations: cutting and bending. So the basic set consists of three items.
Bending press. Bending presses bend sheet to the required angles. Manual models suit site work and small batches, hydraulic and electromechanical ones suit stable serial work.
Cutting. Metal guillotines and multifunction shears for fast, straight cuts of sheet.
Special operations. Metal rolls for cylindrical elements and pipe and profile benders for pipes and profiles.
This set can produce most flashings, trims and abutments. KVERB supplies Sorex manual bending presses, chosen by craftsmen for site and small-batch work, and hydraulic bending presses for higher loads.
Equipment for standing seam roofing
Standing seam roofing requires not only bending but also seam forming and handling long sheets. The catalogue includes specialised standing seam roofing equipment: machines that form the profile and joint directly for the needs of the site. The solution is chosen by sheet length, material and whether the covering is made on site or in the workshop.
Drainage systems: a separate line
Gutters and pipes are a product that is easy to sell together with the roof. They are made with gutter production equipment, which forms the gutter from coil to the specified size. This allows elements of any length without joints and a quick response to non-standard sites.
Manual, hydraulic or CNC: how to choose
Manual equipment suits site work, small batches and workshops without an industrial power supply.
Hydraulic and electromechanical machines give stability and productivity as volumes grow.
CNC machines are justified when high repeatability of complex elements and minimal influence of the human factor are needed.
New or used
For expanding roofing workshops, used machines from Europe are a way to launch in-house production faster with a smaller initial budget. We select inspected equipment and explain the condition of each unit. See also our selection of used equipment.
Frequently asked questions
What equipment does a roofer need to make elements?
At minimum, a bending press and a means of cutting sheet (a guillotine or shears). Standing seam roofing adds a specialised machine, and gutters need a gutter-forming machine.
Can elements be made on site?
Yes, compact manual and mobile solutions exist for this. For serial orders it is more convenient to have a stationary workshop.
Will KVERB help choose equipment and organise commissioning?
Yes. We select equipment for Your products and materials, arrange delivery across Ukraine, documentation, warranty and commissioning support.
Roofing equipment in the KVERB catalogue
Standing seam roofing equipment · Sheet benders · Metal rolls · Guillotine shears · Multifunctional shears · Gutter forming equipment · Pipe and profile benders
We will put together a set for Your company
Tell us which elements You want to make and in what volumes. We will propose a set and a launch order. Phones: +38 (098) 127 45 85, +38 (050) 673 51 21. Email: info@kverb.eu.










